Robust Innovation = Low total cost of ownership.
The proven concept of DEMAREC’s Multi Quick Processors can be seen as a standard in the market. The MQP-series has been developed according a totally renewed concept, in which the emphasis lies on efficiency in the broadest sense of the word. The MQP is available with jaws suited for the cutting and pulverizing of concrete construction, concrete steel and for the cutting of steel constructions and scrap. All jaws are perfectly suited for the heavy duty tasks in demolition and recycling. The MQP is equipped with 2 rotation motors with shock valves for extra rotation power. Over more, the oil transit has been supplied with 2 extra channels which, in the future, can be optionally equipped with a greasing system and/or water spraying system. DEMAREC MQP's have a very advantageous power to weight ratio and a big jaw opening.
By using the new DemaLink-System, which has been developed by DEMAREC itself, the jaws can be changed hydraulically extremely fast and easily. In less than 10 minutes the MQP changes from a scrap sheer into a concrete pulveriser or a concrete cutter. This means no unnecessary down time and always the right jaw for the job. Because of the DemaLink-System the jaws can be changed safely on location by just 1 person.
All DEMAREC Multi-Quick Processors are equipped with the DemaPower-System. This unique technique has also been developed by DEMAREC itself. The DemaPower-System has a double acting speed valve, which gives the MQP more power and results in extreme fast cycle times. The jaws can be opened and closed within 5 seconds. And, because the cylinder has four pressure chambers, it has 20% more power than a conventional cylinder. This results in a huge gain of capacity.
Exchangeable wear parts
What makes the DEMAREC Multi-Quick Processors unique is that all available jaws are fully built out of exchangeable wear parts. This goes for the upper jaw, as well as the lower jaw. This makes welding of the jaw practically unnecessary and avoids metal fatigue of the main material. Moreover the wear parts can be replaced on site for maintenance. This avoids unnecessary transport of the pulveriser so it can work continuously.
Technical data DEMAREC Multi-Quick Processors
Multi-Quick Processors Y |
Type |
Carrier weight (ca.) * |
Opening / Closing Pmax |
Flow |
Rotation Pmax |
Flow |
Cycle time Opening / Closing |
MQP-25-Y |
18 - 25 ton |
380 bar |
120-200 l/min |
140 bar |
40-60 l/min |
1,5/2,3 sec |
MQP-30-Y |
22 - 35 ton |
380 bar |
150-250 l/min |
140 bar |
40-60 l/min |
2,0/2,3 sec |
MQP-45-Y |
32 - 50 ton |
380 bar |
200-300 l/min |
140 bar |
40-60 l/min |
2,0/2,9 sec |
MQP-60-Y |
45 - 65 ton |
380 bar |
300-400 l/min |
140 bar |
40-60 l/min |
2,0/2,8 sec |
Combi-jaw |
|
Type |
Weight** (ca.) |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
|
MQP-25-C |
2060 kg |
85/120 t |
785 mm |
90 mm |
375 mm |
810 mm |
|
MQP-30-C |
2680 kg |
100/150 t |
870 mm |
100 mm |
440 mm |
920 mm |
|
MQP-45-C |
3365 kg |
130/185 t |
980 mm |
100 mm |
450 mm |
990 mm |
|
MQP-60-C |
4525 kg |
150/220 t |
1150 mm |
100 mm |
480 mm |
1050 mm |
|
Demolition-jaw |
|
Type |
Weight** |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
|
MQP-25-D |
2085 kg |
90/145 t |
815 mm |
90 mm |
400 mm |
810 mm |
|
MQP-30-D |
2690 kg |
105/160 t |
870 mm |
100 mm |
470 mm |
900 mm |
|
MQP-45-D |
3405 kg |
130/195 t |
990 mm |
100 mm |
515 mm |
960 mm |
|
MQP-60-D |
4495 kg |
150/270 t |
1175 mm |
100 mm |
550 mm |
1090 mm |
|
Demolition-pulveriser-jaw |
|
Type |
Weight** |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
|
MQP-25-P |
2100 kg |
85/130 t |
790 mm |
325 mm |
400 mm |
810 mm |
|
MQP-30-P |
2665 kg |
100/150 t |
880 mm |
350 mm |
470 mm |
830 mm |
|
MQP-45-P |
3450 kg |
130/185 t |
980 mm |
400 mm |
515 mm |
945 mm |
|
MQP-60-P |
4565 kg |
150/205 t |
1150 mm |
450 mm |
550 mm |
1090 mm |
|
Steel-jaw |
|
Type |
Weight** |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
|
MQP-25-S |
1985 kg |
300 t*** |
370 mm |
100 mm |
320 mm |
560 mm |
|
MQP-30-S |
2460 kg |
340 t*** |
410 mm |
120 mm |
355 mm |
600 mm |
|
MQP-45-S |
3130 kg |
415 t*** |
465 mm |
120 mm |
375 mm |
700 mm |
|
MQP-60-S |
4315 kg |
465 t*** |
540 mm |
120 mm |
410 mm |
750 mm |
|
Tankschear-jaw |
|
Type |
Weight** |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
Sheet thickness |
MQP-25-T** |
2130 kg |
295 t*** |
330 mm |
100 mm |
265 mm |
570 mm |
20 mm |
MQP-30-T |
2710 kg |
360 t*** |
335 mm |
120 mm |
305 mm |
575 mm |
25 mm |
MQP-45-T |
3320 kg |
460 t*** |
390 mm |
120 mm |
305 mm |
630 mm |
30 mm |
MQP-60-T |
4460 kg |
655 t*** |
400 mm |
150 mm |
355 mm |
660 mm |
40 mm |
Universal-jaw |
|
Type |
Weight** |
Closing force front tooth |
Jaw opening |
Width of upper jaw |
Width of lower jaw |
Depth |
|
MQP-25-U |
- |
- |
- |
- |
- |
- |
|
MQP-30-U |
2640 kg |
110/175 t |
590 mm |
280 mm |
500 mm |
790 mm |
|
MQP-45-U |
3195 kg |
145/190 t |
670 mm |
310 mm |
525 mm |
830 mm |
|
MQP-60-U |
4425 kg |
180/285 t |
820 mm |
340 mm |
590 mm |
880 mm |
|
Demarec MPQ
*Depending of lifting capacity of carrier / **Weight excluding standard bracket / ***Mid upper blade
Subject to change without notice.